Radius Nas-Port-Format Extended - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

radius nas-port-format extended

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
For ATM interfaces:
radius nas-port-format extended atm [ field-widths [ slot slotWidth ]
[ adapter adapterWidth ] [ port portWidth ] [ vpi vpiWidth ] [ vci vciWidth ] ]
no radius nas-port-format extended atm
For Gigabit and 10-Gigabit Ethernet interfaces:
radius nas-port-format extended ethernet [ field-widths [ slot slotWidth ]
[ adapter adapterWidth ] [ port portWidth ] [ svlan svlanWidth ] [ vlan vlanWidth ] ]
no radius nas-port-format extended ethernet
Command introduced in JunosE Release 7.1.0.
Configures the RADIUS client's use of an extended format for RADIUS attribute 5,
NAS-Port, on ATM, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces on the E120
router and the E320 router. If you do not set the extended format for E120 or E320 routers,
the RADIUS client uses the default format set through the radius nas-port-format
command, which does not accommodate the number of bits required by the
slot/adapter/port interface specifier on E120 and E320 routers. Issuing this command
enables you to encode the interface information in the attribute by specifying the number
of bits available for each field in the interface specifier. The no version removes the format.
field-widths—Configures the width of the fields in the NAS-Port attribute
slotWidth—Number of bits for the slot field
adapterWidth—Number of bits for the adapter field
portWidth—Number of bits for the port field
vpiWidth—Number of bits for the VPI subinterface field on ATM interfaces
vciWidth—Number of bits for the VCI subinterface field on ATM interfaces
svlanWidth—Number of bits for the S-VLAN subinterface field on Gigabit Ethernet and
10-Gigabit Ethernet interfaces
vlanWidth—Number of bits for the VLAN subinterface field on Gigabit Ethernet and
10-Gigabit Ethernet interfaces
Global Configuration
Chapter 6: R Commands
333