Path Ds3 Framing - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

path ds3 framing

Syntax
Release Information
Description
Options
Mode
156
path pathChannel ds3 ds3Channel framing framingType
no path pathChannel ds3 ds3Channel framing
Command introduced before JunosE Release 7.1.0.
Configures the framing format for a DS3 signal. This command applies to a DS3 over
channelized SONET interface. The no version restores the default value.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the path
framingType—Choose one of the following:
c-bit—Default; specifies C-bit parity framing
m23—Specifies M23 multiplexer framing
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.