Show Ip Static - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ip static

Syntax
Release Information
Description
Options
Mode
872
show ip static [ vrfName ] [ ipAddress ipMask [ all ] ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays general status information for static routes added by network management to
the routing table.
vrfName—Name of the VRF
ipAddress—IP address to show
ipMask—IP mask of the specific address to show
all—Displays all routes starting at the specified prefix
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.