Show Mirror Log - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show mirror log

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1004
show mirror log [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays a log of failure messages for secure policy lists. By default, you must have CLI
user access level 13 or above to use this command; an administrator can modify the user
access level requirement.
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Monitoring Failure Messages for Secure Policies
Monitoring Information for Secure Policies
Logging Packet Mirroring Information
Copyright © 2010, Juniper Networks, Inc.