Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
schedule macro
Syntax
Release Information
Description
Options
Mode
Related
Documentation
430
schedule macro { interval { frequency freqInMinutes | time-of-day dayTime [day-of-week
dayOfWeek | day-of-month dayOfMonth ] } | at atTime [ month day | day month ] }
fileName macroName [ macroArg ]*
no schedule macro [ fileName [ macroName ] ]
Command introduced in JunosE Release 9.3.0.
Schedules a macro to run once at a specific time, after a periodic interval, or at a periodic
time, such as time of day, day of the week or day of the month. In Global Configuration
mode, the setting persists on reboot, but in Privileged Exec mode, it does not persist on
reboot. Both methods support high availability. The no version unschedules the macro
time to run.
interval—Schedule a macro to run at a specified time once, after a periodic interval, or
at a periodic time of the day, day of the week, or day of the month
fileName—Name of the file on which to schedule a time to run
freqInMinutes—Interval start time start in minutes in which to schedule a macro to run
dayTime—Interval time of day for a macro to run
dayOfWeek—Interval day of the week for a macro to run
dayOfMonth—Interval day of the month for a macro to run
atTime—Time at which to start a macro to run
macroName—Name of the interval macro file
macroArg—Name of the macro
Global Configuration, Privileged Exec
Scheduling Macros in the JunosE System Basics Configuration Guide
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
