Ppp Ipcp Netmask - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

ppp ipcp netmask

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ppp ipcp netmask
Command introduced before JunosE Release 7.1.0.
Explicitly enables the IPCP option 0x90 on a per-PPP interface basis, either in a profile
or on a static interface. By default, the IPCP option 0x90 is disabled on the interface. The
no version disables the IPCP option 0x90.
Interface Configuration, Profile Configuration, Subinterface Configuration
Chapter 4: P Commands
221