Radius Include Dsl-Forum-Attributes - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

radius include dsl-forum-attributes

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
radius include dsl-forum-attributes
{ access-request | acct-start | acct-stop } { enable | disable }
no radius include dsl-forum-attributes { access-request | acct-start | acct-stop }
Command introduced in JunosE Release 7.3.0.
Enables the inclusion of a set of DSL Forum vendor-specific attributes (VSAs) in
Access-Request, Acct-Start, or Acct-Stop messages that the router sends to RADIUS.
If you specify the Acct-Stop message, the router also includes the DSL Forum VSAs in
outgoing RADIUS Interim-Acct messages. The no version restores the default behavior,
which excludes the DSL Forum VSAs from these outgoing RADIUS messages.
If you enable the inclusion of DSL Forum VSAs in RADIUS messages, the router includes
all of the following DSL Forum VSAs in the specified message type, provided that the
VSA is available in the information that the router receives from the DSLAM.
Agent-Circuit-Id [26-1]
Agent-Remote-Id [26-2]
Actual-Data-Rate-Upstream [26-129]
Actual-Data-Rate-Downstream [26-130]
Minimum-Data-Rate-Upstream [26-131]
Minimum-Data-Rate-Downstream [26-132]
Attainable-Data-Rate-Upstream [26-133]
Attainable-Data-Rate-Downstream
[26-134]
Maximum-Data-Rate-Upstream [26-135]
access-request—Specifies RADIUS Access-Request messages
acct-start—Specifies RADIUS Acct-Start messages
acct-stop—Specifies RADIUS Acct-Stop messages and Interim-Acct messages
enable—Causes the router to include the DSL Forum VSAs, if available, in the specified
outgoing RADIUS message
disable—Causes the router to exclude the DSL Forum VSAs from the specified outgoing
RADIUS message; this is the default behavior
Chapter 6: R Commands
Maximum-Data-Rate-Downstream [26-136]
Minimum-Data-Rate-Upstream-Low-Power
[26-137]
Minimum-Data-Rate-Downstream-Low-Power
[26-138]
Maximum-Interleaving-Delay-Upstream [26-139]
Actual-Interleaving-Delay-Upstream [26-140]
Maximum-Interleaving-Delay-Downstream [26-141]
Actual-Interleaving-Delay-Downstream [26-142]
Access-Loop-Encapsulation [26-144]
IWF-Session [26-254]
329