Ntp Access-Group - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

ntp access-group

Syntax
Release Information
Description
Options
Mode
96
ntp access-group { peer | serve-only | serve | query-only } accessListName
no ntp access-group { peer | serve-only | serve | query-only }
Command introduced before JunosE Release 7.1.0.
Specifies the type of broadcasts that the router will accept and respond to, and specifies
the servers from which the router will accept broadcasts. The no version enables the
router to receive all NTP broadcasts on interfaces configured to receive broadcasts.
NOTE: The router can accept, but does not use, NTP control queries.
peer—Enables the router to receive time requests, receive NTP control queries, and
synchronize itself to the servers specified on the access list
serve-only—Enables the router to receive time requests and NTP control queries from
servers specified on the access list, but not to synchronize itself to the specified servers
serve—Enables the router only to receive time requests from the servers specified on
the access list
query-only—Enables the router only to receive NTP control queries from the servers
specified on the access list
accessListName—Name of the access list
Global Configuration
Copyright © 2010, Juniper Networks, Inc.