Show Ipv6 Rpf-Route - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ipv6 rpf-route

Syntax
Release Information
Description
Options
950
show ipv6 rpf-route [ vrf vrfName ] [ ipv6Address [ detail ] | ipv6Prefix [ detail ] ]
[ all ] [ protocol ] [ filter ]
Command introduced before JunosE Release 7.1.0.
vrf keyword and vrfName variable added in JunosE Release 7.2.0.
Displays IPv6 routes that the router can use to verify source addresses in multicast
packets.
vrfName—Name of the VRF
ipv6Address—Specific IPv6 address to show
ipv6Mask—IPv6 mask of the specific address to show
detail—displays detailed information about the specified route
all—Displays routes from all sources to a prefix
protocol—One of the following protocols for which you want to display the best routes
in the routing table; no routes are displayed if routes for the specified protocol are not
present in the routing table
access—Displays the best access-server routes (BGP) in the routing table
access-internal—Displays the best access-internal routes in the routing table
bgp—Displays the best BGP routes in the routing table
bgp-tunnel—Displays the best BGP tunnel routes in the routing table
dvmrp—Displays the best DVMRP routes in the routing table
isis—Displays the best IS-IS routes in the routing table
ldp—Displays the best LDP tunnel routes in the routing table
local—Displays the best locally connected routes in the routing table
mbgp—Displays the best MBGP routes in the routing table
ospf—Displays the best OSPF routes owned by in the routing table
other—Displays the best internal control routes in the routing table
rip—Displays the best RIP routes in the routing table
rsvp—Displays the best RSVP tunnel routes in the routing table
Copyright © 2010, Juniper Networks, Inc.