Pos Scramble-Atm - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

pos scramble-atm

Syntax
Release Information
Description
Mode
210
[ no ] pos scramble-atm
Command introduced before JunosE Release 7.1.0.
Enables payload scrambling on a POS interface. When enabled, both sides of the
connection must be using the scrambling algorithm. The router uses a 43rd-order
synchronous scrambler to scramble the output data. Scrambling is enabled by default.
The no version disables scrambling on the POS interface.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.