Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 635

Mode
Copyright © 2010, Juniper Networks, Inc.
extended-communities—Extended community
imported—Whether the route was imported
intro—Introductory information about the state of various BGP attributes; this
information is displayed only if you specify this keyword
in-label—MPLS label for the route; the label received with incoming MPLS frames;
typically, but not always, this is the label advertised to MP-BGP peers
loc-pref—Local preference for the route
med—Multiexit discriminator for the route
next-hop—IP address of the next router that is used when forwarding a packet to
the destination network
next-hop-cost—Whether the indirect next hop of the route is unreachable, if not,
displays IGP cost to the indirect next hop
origin—Origin of the route
originator-id—Router ID of the router in the local AS that originated the route
out-label—MPLS label for the route; the label sent with outgoing MPLS frames; also
the label received from MP-BGP peer; typically, but not always, this is the label
received from MP-BGP peers
peer—IP address of BGP peer from which route was learned
peer-type—Type of BGP peer: internal, external, or confederation
rd—Route distinguisher
safi—Subsequent address family identifier
stale—Route that has gone stale due to peer restart
unknown-types—Attribute codes for unknown path attributes
weight—Weight of the route
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
delta—Displays baselined statistics
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
593