Table of Contents
Advertisement
pppoe remote-circuit-id
Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] pppoe remote-circuit-id
Command introduced before JunosE Release 7.1.0.
Enables a static or dynamic PPPoE interface on the router to capture and process a
vendor-specific tag containing a remote circuit ID transmitted from a DSLAM device. The
router can then send this value to a RADIUS server or to an L2TP network server (LNS)
to uniquely identify subscriber locations. The no version restores the default behavior,
which is not to capture and process the remote circuit ID.
Interface Configuration, Profile Configuration, Subinterface Configuration
Chapter 4: P Commands
253
Advertisement
Table of Contents
