Peak-Rate - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

peak-rate

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
peak-rate { rate | parameterName percentage percentValue }
no peak-rate
Command introduced before JunosE Release 7.1.0.
parameterName and percentValue variables added in JunosE Release 8.1.0.
Sets the peak rate for a rate-limit profile. The no version restores the default value, 0.
rate—Rate in bits per second in the range 0–4294967295
parameterName—Name of policy parameter up to 40 characters
percentValue—Percentage in the range 0–100
Rate Limit Profile Configuration
Creating a Two-Rate Rate-Limit Profile
Chapter 4: P Commands
185