Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
ppp reassembly
Syntax
Release Information
Description
Options
Mode
238
ppp reassembly [ mrru ]
no ppp reassembly
Command introduced before JunosE Release 7.1.0.
Enables reassembly on an MLPPP link interface and optionally specifies the administrative
MRRU value, in octets, for the link. The no version disables reassembly on the link and
restores the default value, which is the link's local MRU.
mrru—Maximum allowable size of the PPP packet payload that the router can receive,
in the range 64–65535; default value is the link's local MRU
Interface Configuration, Profile Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
