Path Ds3 T1 Fdl - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

path ds3 t1 fdl

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
path pathChannel ds3 ds3Channel t1 t1Channel fdl { ansi | att | all | none }
no path pathChannel ds3 ds3Channel t1 t1Channel fdl [ ansi | att | all ]
Command introduced before JunosE Release 7.1.0.
Specifies the facilities data link (FDL) standard for a T1 channel on a DS3 signal. This
command applies to a T1 channel on a DS3 over channelized SONET interface. The no
version restores the default, none.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
ansi—Specifies ANSI T1.403 Standard for extended superframe FDL exchange support
att—Specifies AT&T Technical Reference 54016 for extended superframe FDL exchange
support
all—Specifies both the AT&T and ANSI mode for extended superframe FDL exchange
support
none—Removes the current FDL mode settings
Controller Configuration
Chapter 4: P Commands
167