Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 367

Software for e series broadband services routers command reference n to z
Table of Contents

Advertisement

Chapter 6: R Commands
framed-interface-id—Excluded by default; includes RADIUS attribute 96,
Framed-Interface-Id, if an IPv6 interface ID is assigned to the subscriber
framed-ip-addr—Includes RADIUS attribute 8, Framed-IP-Address, if an IP address
is assigned to the subscriber
framed-ipv6-prefix—Excluded by default; includes RADIUS attribute 97,
Framed-Ipv6-Prefix, if at least one IPv6 prefix is assigned to the subscriber
icr-partition-id—Excluded by default; includes RADIUS attribute 26-150,
ICR-Partition-Id, which is a user-configured value of up to 128 characters
interface-description—Includes RADIUS attribute 26-63, Interface-Desc
l2c-downstream-data—Includes RADIUS attribute 26-92, L2C-Down-Stream-Data
l2c-upstream-data—Includes RADIUS attribute 26-93, L2C-Up-Stream-Data
l2c-upstream-data—Includes RADIUS attribute 26-93, L2C-Up-Stream-Data
l2cd-acc-loop-cir-id—Excluded by default; includes RADIUS attribute 26-110,
Acc-Loop-Cir-Id
l2cd-acc-aggr-cir-id-bib—Excluded by default; includes RADIUS attribute 26-111,
Acc-Aggr-Cir-Id-Bin
l2cd-acc-aggr-cir-id-asc—Excluded by default; includes RADIUS attribute 26-112,
Acc-Aggr-Cir-Id-Asc
l2cd-act-data-rate-up—Excluded by default; includes RADIUS attribute 26-113,
Act-Data-Rate-Up
l2cd-act-data-rate-dn—Excluded by default; includes RADIUS attribute 26-114,
Act-Data-Rate-Dn
l2cd-min-data-rate-up—Excluded by default; includes RADIUS attribute 26-115,
Min-Data-Rate-Up
l2cd-min-data-rate-dn—Excluded by default; includes RADIUS attribute 26-116,
Min-Data-Rate-Dn
l2cd-att-data-rate-up—Excluded by default; includes RADIUS attribute 26-117,
Att-Data-Rate-Up
l2cd-att-data-rate-dn—Excluded by default; includes RADIUS attribute 26-118,
Att-Data-Rate-Dn
l2cd-max-data-rate-up—Excluded by default; includes RADIUS attribute 26-119,
Max-Data-Rate-Up
l2cd-max-data-rate-dn—Excluded by default; includes RADIUS attribute 26-120,
Max-Data-Rate-Dn
Copyright © 2010, Juniper Networks, Inc.
325

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents