Show Bgp Ipv6 Neighbors - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show bgp ipv6 neighbors

Syntax
Release Information
Description
Options
Mode
588
show bgp ipv6
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ]
neighbors [ ipAddress | ipv6Address ] [ delta ] [ filter ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
route-target signaling keywords added in JunosE Release 8.2.0.
Displays information about BGP neighbors.
unicast—Specifies the IPv6 unicast address family and routing table; the default option
multicast—Specifies the IPv6 multicast address family and routing table
vpnv6 all—Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName—Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
route-target signaling—Specifies the route-target address family
ipAddress—IP address of a neighbor whose routes the router has learned
ipv6Address—IPv6 address of a neighbor whose routes the router has learned
delta—Displays baselined statistics
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.