JunosE 11.3.x Command Reference Guide N to Z
neighbor as-override
Syntax
Release Information
Description
Options
Mode
28
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } as-override
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Prevents routing loops between routers within a VPN by substituting the current router's
AS number in routing tables for that of the neighboring router. When you issue this
command, new policy values are applied to all routes that are sent (outbound policy) or
received (inbound policy).
The no version halts this substitution. The default version removes the explicit
configuration from the peer or peer group and reestablishes inheritance of the feature
configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command. You cannot override the characteristic
for a specific member of the peer group.
Router Configuration
Copyright © 2010, Juniper Networks, Inc.