Nsf Ietf - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

nsf ietf

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] nsf ietf
Command introduced before JunosE Release 7.1.0.
Enables the IS-IS graceful restart mechanism on the router as defined in RFC
3847—Restart Signaling for Intermediate System to Intermediate System (IS-IS) (July
2004). Graceful restart, which is also known as nonstop forwarding (NSF), allows an
IS-IS router to restart with minimal routing disruption to the network. The no version
restores the default state (disabled) for IS-IS graceful restart on the router.
Router Configuration
Chapter 2: N Commands
91