Show Ip Bgp Peer-Group - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show ip bgp peer-group

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName |
l2vpn [ all ] | route-target signaling ] peer-group [ peerGroupName ] [ filter ]
Command introduced before JunosE Release 7.1.0.
l2vpn and all keywords added in JunosE Release 7.1.0.
route-target signaling keywords added in JunosE Release 8.2.0.
Displays information about BGP peer groups.
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the default
option
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
vpvn4 vrf vrfName—Specifies the IPv4 VPN address family and only the IPv4 VPN
routing and forwarding instance with the name vrfName
l2vpn—Displays information for only the L2VPN address family
all—Optional keyword; has no effect
route-target signaling—Displays information for only the route-target address family
peerGroupName—Name of the BGP peer group
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Monitoring BGP-Related Settings for L2VPNs in the JunosE BGP and MPLS Configuration
Guide
Chapter 7: S Commands
753