Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
net
Syntax
Release Information
Description
Options
Mode
70
[ no ] net networkEntityTitle
Command introduced before JunosE Release 7.1.0.
Configures an IS-IS network entity title for the specified routing process. The no version
removes a specific NET. You must specify a NET. You can add multiple manual area IDs
by adding multiple NETs with the same system ID. The last NET cannot be removed.
networkEntityTitle—NET that specifies the area ID and the system ID for an IS-IS routing
process; can be either an address or a name; in the form of: areaID.systemID.nSelector
For example:
areaID—All bytes in front of the system ID; the number of bytes can vary from 1–13
bytes
systemID—Always 6 bytes and cannot vary
nSelector—Last byte; always 0
Router Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
