Table of Contents
Advertisement
ppp chap-challenge-length
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ppp chap-challenge-length minLength maxLength
no ppp chap-challenge-length
Command introduced before JunosE Release 7.1.0.
Modifies the length of the CHAP challenge by specifying the minimum and maximum
allowable length. The no version restores the defaults.
CAUTION: Do not use the ppp chap-challenge-length command; increasing
the minimum length (from the default 16 bytes) or decreasing the maximum
length (from the default 32 bytes) reduces the security of your router.
minLength—Minimum length of the CHAP challenge in bytes, in the range 8–63; default
value is 16 bytes
maxLength—Maximum length of the CHAP challenge in bytes, in the range 8–63; value
must be equal to or greater than the minimum length; default value is 32 bytes
Interface Configuration, Profile Configuration, Subinterface Configuration
Chapter 4: P Commands
213
Advertisement
Table of Contents
