Table of Contents
Advertisement
radius remote-circuit-id-format
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
radius remote-circuit-id-format { [ nas-identifier ] { agent-circuit-id | agent-remote-id |
agent-circuit-id agent-remote-id } | dsl-forum-1 }
no radius remote-circuit-id format
Command introduced before JunosE Release 7.1.0.
dsl-forum-1 keyword added in JunosE Release 7.2.0.
Specifies the format of the PPPoE remote circuit ID value sent from a DSLAM and captured
on the router. You can format the PPPoE remote circuit ID value to include either or both
of the agent-circuit-ID (suboption 1) and agent-remote-id (suboption 2) suboptions of
the tags supplied by the PPPoE intermediate agent. The no version restores the default
format, agent-circuit-id.
nas-identifier—Formats the PPPoE remote circuit ID value to include the NAS-Identifier
[32] RADIUS attribute with either or both of the agent-circuit-id and agent-remote-id
suboptions. If you include the nas-identifier keyword, you must also include either or
both of the agent-circuit-id and agent-remote-id keywords.
agent-circuit-id—Formats the PPPoE remote circuit ID value to include only the
agent-circuit-id suboption; this is the default format
agent-remote-id—Formats the PPPoE remote circuit ID value to include only the
agent-remote-id suboption
agent-circuit-id agent-remote-id—Formats the PPPoE remote circuit ID value to include
both the agent-circuit-id and agent-remote-id suboptions
dsl-forum-1—Formats the PPPoE remote circuit ID value to append the agent-circuit-id
suboption value to an interface specifier that is consistent with the recommended
format in the DSL Forum Technical Report (TR)-101—Migration to Ethernet-Based DSL
Aggregation (April 2006).
Global Configuration
Chapter 6: R Commands
343
Advertisement
Table of Contents
