JunosE 11.3.x Command Reference Guide N to Z
radius trap acct-server-not-responding
Syntax
Release Information
Description
Options
Mode
346
radius trap acct-server-not-responding { enable | disable }
no radius trap acct-server-not-responding
Command introduced before JunosE Release 7.1.0.
Enables or disables SNMP traps when a RADIUS accounting server fails to respond to a
RADIUS accounting request. The no version restores the default, disable.
enable—Specifies the feature
disable—Disables the feature; this is the default setting
Global Configuration
Copyright © 2010, Juniper Networks, Inc.