JunosE 11.3.x Command Reference Guide N to Z
redundancy force-switchover
Syntax
Release Information
Description
Options
Mode
372
redundancy force-switchover { slotNumber | srp }
Command introduced before JunosE Release 7.1.0.
Forces the router to switch from the primary line module in the specified slot or the primary
SRP module to the spare line module or SRP module. This command overrides the
redundancy lockout command. With the srp option, the command is equivalent to the
srp switch command. There is no no version.
NOTE: This command replaces the redundancy force-failover command,
which has been deprecated.
slotNumber—Number of the slot in which the primary line module resides
srp—Indicates that the router should switch from the active to the standby SRP module
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.