Show Ip Explicit-Paths - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ip explicit-paths

Syntax
Release Information
Description
Mode
790
show { mpls | ip } explicit-paths
[ detail | { name pathName | identifier pathNum } ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays all explicit paths or a particular explicit path in a non–E Series implementation.
See the show mpls explicit-paths command for a complete description and syntax
definitions.
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.