Send Version - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

send version

Syntax
Release Information
Description
Options
Mode
446
[ no ] send version [ 1 | 2 | off ]
Command introduced before JunosE Release 7.1.0.
Restricts the RIP version that the router can send on a remote-neighbor interface. The
no version sets the remote-neighbor interface back to the default value, sending only
RIP version 1.
1—Specifies RIP version 1 only
2—Specifies RIP version 2 only
off —Turns reception off
Remote Neighbor Configuration
Copyright © 2010, Juniper Networks, Inc.