show mpls fast-reroute database
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show mpls [ traffic-eng ] fast-reroute database [ ipAddress ]
[ name tunnelName ] [ interface interfaceType interfaceSpecifier ]
[ status { all | desired | establishing | established | active | unknown } ]
[ count-only ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information about the backup state of protected primary tunnels.
traffic-eng—Specifies optional keyword for compatibility with non–E Series
implementations
ipAddress—Address of the endpoint for the primary LSP; meaningful only for the tunnel
ingress node
tunnelName—Name of the primary LSP; meaningful only for the tunnel ingress node
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
status—Displays only entries with the specified status:
all—Displays all entries regardless of backup protection status
desired—Displays entries where backup protection is desired
establishing—Displays entries where backup protection is being established
established—Displays entries where backup protection is established
active—Displays entries where backup protection is active
unknown—Displays entries where status of backup protection is unknown
count-only—Displays count of entries matching command specification
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
1013
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 and is the answer not in the manual?