Rename - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

rename

Syntax
Release Information
Description
Options
386
rename [ sourcePath]sourceFilename [ destinationPath]destinationFilename
Command introduced before JunosE Release 7.1.0.
hostName and deviceName variables added in JunosE Release 7.2.0.
Renames a local file. There is no no version.
NOTE: You cannot change the extension of a file, for example, from .mac to
.scr. See Renaming Files in the JunosE System Basics Configuration Guide for
detailed information on file type usage with the rename command.
sourcePath—Path to the source in the format:
hostName: | deviceName: | /incoming/subdirectory/ | /outgoing/subdirectory/
hostName:—Name of the network host
deviceName:—Name of the device specifying a flash card slot
disk0—Specifies flash card slot 0 on the primary SRP module; if no device is specified
for the primary SRP module, then disk0 is used
disk1—Specifies flash card slot 1 on the primary SRP module; source and destination
file types must be .dmp; supported only on the E120 router and the E320 router
standby—Specifies flash card slot 0 on the standby SRP module for backward
compatibility
standby-disk0—Specifies flash card slot 0 on the standby SRP module
standby-disk1—Specifies flash card slot 1 on the standby SRP module; source and
destination file types must be .dmp; supported only on E120 and E320 routers
incoming—Specifies the router's incoming FTP directory
subdirectory—Name of a subdirectory on the router's FTP server. If the subdirectory
does not exist, the router creates it.
outgoing—Specifies the router's outgoing FTP directory
sourceFileName—File to rename
destinationPath—Path to the destination in the format:
networkPath | /incoming/subdirectory | /outgoing/subdirectory
networkPath—Path to the network host
incoming—Specifies the incoming router's FTP directory
Copyright © 2010, Juniper Networks, Inc.