Service Check-Config - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

service check-config

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] service check-config [ auto | fileName fileName | running-configuration |
running-configuration recover | auto-recover ]
Command introduced in JunosE Release 9.3.0.
auto-recover keyword added in JunosE Release 10.3.0.
Detects corruption of running configuration on both primary and standby SRP due to
fatal duplicate key error. In addition, the command detects corruption of CNF files on the
primary SRP only. The no version restores the default action, manual detection.
auto—Checks the running configuration at regular intervals; cannot be used for CNF
files.
fileName—Name of an existing configuration file (.cnf) that needs to be validated for
corruption
running–configuration—Specifies that the running configuration needs to be validated
for corruption
running-configuration recover—Recovers the corrupted configuration files in the running
configuration
auto-recover—Specifies that the running configuration needs to be validated for
corruption and the corrupted files need to be recovered
Global Configuration
Chapter 7: S Commands
451