Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 356

JunosE 11.3.x Command Reference Guide N to Z
314
systemName (up to 4 bytes) slot (1 byte) adapter (1 byte) port (1 byte)
VLAN (8 bytes)
Format for serial interfaces:
systemName (up to 4 bytes) slot (1 byte) adapter (1 byte) port (1 byte)
0 (8 bytes)
For E120 routers and E320 routers, adapter is the number of the bay in which the I/O
adapter (IOA) resides, either 0 (representing the right IOA bay on the E120 router
and the upper IOA bay on the E320 router) or 1 (representing the left IOA bay on the
E120 router or the lower IOA bay on the E320 router). For ERX7xx models, ERX14xx
models, and ERX310 routers, adapter is always shown as 0.
Slot numbers 0 through 16 are shown as ASCII characters in the 1-byte slot field.
fixed-format-adapter-new-field—Specifies that the RADIUS client uses a fixed format
of up to 17 characters consisting of all ASCII fields with a 2-byte slot field, 1-byte adapter
field, and 2-byte port field:
Format for ATM interfaces:
systemName (up to 4 bytes) slot (2 bytes) adapter (1 byte) port (2 bytes)
VPI (3 bytes) VCI (5 bytes)
Format for Ethernet interfaces:
systemName (up to 4 bytes) slot (2 bytes) adapter (1 byte) port (2 bytes) VLAN (8
bytes)
Format for serial interfaces:
systemName (up to 4 bytes) slot (2 bytes) adapter (1 byte) port (2 bytes)
0 (8 bytes)
For E120 routers and E320 routers, adapter is the number of the bay in which the IOA
resides, either 0 or 1. For ERX7xx models, ERX14xx models, and ERX310 routers,
adapter is always shown as 0.
Slot numbers 0 through 16 are shown as integers in the 2-byte slot field.
stacked—Includes a 4-byte stacked VLAN (S-VLAN ID) for Ethernet interfaces when
the RADIUS client uses the fixed-format, fixed-format-adapter-embedded, or
fixed-format-adapter-new-field format; by default, these formats do not include the
S-VLAN ID unless you specify the optional stacked keyword:
Format for Ethernet interfaces that use fixed-format:
systemName (up to 4 bytes) slot (2 bytes) port (1 byte) S-VLAN (4 bytes) VLAN (4
bytes)
Format for Ethernet interfaces that use fixed-format-adapter-embedded:
systemName (up to 4 bytes) slot (1 byte) adapter (1 byte) port (1 byte) S-VLAN (4
bytes) VLAN (4 bytes)
Format for Ethernet interfaces that use fixed-format-adapter-new-field:
systemName (up to 4 bytes) slot (2 bytes) adapter (1 byte) port (2 bytes) S-VLAN
(4 bytes) VLAN (4 bytes)
Copyright © 2010, Juniper Networks, Inc.