Table of Contents
Advertisement
show ip bgp
Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
To display information about networks for all address families or for a specific address
family other than the L2VPN address family and the route-target address family:
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ]
[ network [ networkMask [ longer-prefixes ] ] ] [ fields fieldOptions ] [ filter ]
To display information for networks associated with only the L2VPN address family:
show ip bgp { l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName }
[ site-id siteId block-offset blockOffset ] [ fields fieldOptions ] [ filter ]
To display information for networks associated with only the route-target address family:
show ip bgp route-target signaling rtfPrefix [ longer-prefixes ]
[ fields fieldOptions ] [ filter ]
Command introduced before JunosE Release 7.1.0.
l2vpn and all keywords added in JunosE Release 7.1.0.
vpls keyword and vplsName variable added in JunosE Release 7.1.0.
site-id keyword and siteId variable added in JunosE Release 7.1.0.
block-offset keyword and blockOffset variable added in JunosE Release 7.1.0.
vpws keyword and vpwsName variable added in JunosE Release 8.1.0.
route-target signaling keywords and rtMemNlri variable added in JunosE Release 8.2.0.
rtMemNlri variable replaced by rtfPrefix variable in JunosE Release 9.1.0.
Displays filtered information about a specified network, or all networks, in the BGP routing
table associated with a specified address family or all address families. Only those fields
that you specify are displayed, except that the prefix field is always displayed. Default
fields can be set with the default-fields route command.
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the default
option
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
vpvn4 vrf vrfName—Specifies the IPv4 VPN address family and only the IPv4 VPN
routing and forwarding instance with the name vrfName
network—IP address for which the best matching route is displayed; if no network is
specified, displays the fields for all networks
networkMask—Address mask to be applied to the network address
longer-prefixes—Displays all routes with a prefix that is equal to or more specific than
the specified prefix
l2vpn all—Specifies all VPLS and VPWS instances in the L2VPN address family
l2vpn vpls vplsName—Specifies the VPLS instance with the name vplsName
Chapter 7: S Commands
711
Advertisement
Table of Contents
