Show Atm Vc - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

Software for e series broadband services routers command reference n to z
Table of Contents

Advertisement

JunosE 11.3.x Command Reference Guide N to Z

show atm vc

Syntax
Release Information
Description
Options
Mode
560
show atm vc [ atm interfaceSpecifier ] { [ vpi vpi ] [ category categoryType ]
[ status statusType ] | reserved } [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays a summary of all configured ATM virtual circuits (VCs) and reserved VC ranges.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
vpi—Virtual path identifier
categoryType—One of the following service categories for which VCs are displayed:
cbr
nrt-vbr
rt-vbr
ubr
ubr-pc
statusType—Status of VC to be displayed, up or down
reserved—Displays only a summary of all reserved VC ranges on the router, including
those reserved for use by dynamic ATM 1483 subinterfaces and by MPLS
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 and is the answer not in the manual?

This manual is also suitable for:

Junose 11.3

Table of Contents