Show Atm Vp-Description - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show atm vp-description

Syntax
Release Information
Description
Options
Mode
564
show atm vp-description [ interfaceSpecifier [ vpi ] ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays descriptions configured for virtual paths (VPs) on an ATM interface. You can
display all VP descriptions configured on the router, all VP descriptions configured for a
particular interface, or the VP description configured for a particular VPI.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
vpi—Virtual path identifier number, in the range 0–255
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.