Table of Contents
Advertisement
reload slot
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
reload slot slotNumber [ subsystem ] [ force ]
Command introduced before JunosE Release 7.1.0.
Reboot the module in the selected slot. You can reboot the subsystems on the SRP
modules on the E120 router or the E320 router separately. There is no no version.
slotNumber—Number of a selected slot in the router; for ERX7xx models, a number, in
the range 0–6; for ERX14xx models, a number, in the range 0–13; for the ERX310 router,
a number, in the range 0–2; for E120 and E320 routers, a number, in the range 0–16
subsystem—Type of subsystem on E120 and E320 routers; use when the specified
slotNumber is a slot that contains an SRP module
srp—Indicates the system controller (SC) on one or both SRP modules; specify this
keyword to reboot only the portion of the SC on the individual SRP module
fabric—Indicates the portion of the switch fabric on the SRP modules; specify this
keyword to reboot only an individual fabric slice
force—Prompts for confirmation to reboot if the router is in certain states, such as
during the synchronization of SRP modules, that could lead to a loss of configuration
data or an NVS corruption.
Privileged Exec
Chapter 6: R Commands
383
Advertisement
Table of Contents
