Priority Over-Subscription-Factor - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

priority over-subscription-factor

Syntax
Release Information
Description
Options
Mode
266
priority priorityValue over-subscription-factor oversubscriptionValue
no priority priorityValue over-subscription-factor
Command introduced in JunosE Release 8.1.0.
Sets the oversubscription value for each priority rate limiter. The no version returns to
the default value.
priorityValue—Hi-Green-IC, Hi-Green-SC, Hi-Yellow-IC, Hi-Yellow-SC, Lo-Green-IC,
Lo-Green-SC, Lo-Yellow-IC, Lo-Yellow-SC
oversubscriptionValue—Percentage of packets in the range 100–1000; default value
is 500
DoS Protection Group Configuration
Copyright © 2010, Juniper Networks, Inc.