Service-Management Subscriber-Session - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

service-management subscriber-session

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] service-management subscriber-session subscriberName
interface interfaceType interfaceSpecifier
Command introduced in JunosE Release 7.2.0.
Privileged Exec mode added in JunosE Release 8.0.0.
Activates a subscriber session for the specified subscriber. The no version gracefully
removes the subscriber session and all service sessions associated with this subscriber
session.
Privileged Exec mode creates a dynamic subscriber session that is deleted after a router
reboot. Global Configuration mode creates a persistent subscriber session.
NOTE: Always activate at least one service session for a subscriber session.
The ability to create a subscriber session without a service session (by
omitting the service-session keyword) is not currently supported.
subscriberName—Name of the subscriber for this subscriber session
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Global Configuration, Privileged Exec
Chapter 7: S Commands
461