path snmp trap link-status
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
For channelized OCx/STMx interfaces:
[ no ] path pathChannel snmp trap link-status
For unchannelized OCx/STMx interfaces:
[ no ] path snmp trap link-status
Command introduced before JunosE Release 7.1.0.
Enables SNMP link-status processing for the path layer of SONET and SDH interfaces.
The no version disables SNMP link-status processing.
pathChannel—Number, in the range 1–2147483648, that identifies the path on a
channelized interface
Controller Configuration
Chapter 4: P Commands
181