Show Atm Bulk-Config - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show atm bulk-config

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show atm bulk-config [ atm interfaceSpecifier ] [name bulkConfigName ] [ override ]
[ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information, including base profile assignments and overriding profile
assignments, for the bulk-configured VC ranges on an ATM AAL5 interface. You can
display information for all VC ranges on the router, for all VC ranges on a particular ATM
AAL5 interface, or for the VC range associated with a particular bulk configuration name.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
bulkConfigName—Name associated with a VC range on the ATM AAL5 interface, as
specified in the atm bulk-config command
override—Displays information only about each overriding profile assignment configured
for a specific ATM PVC within a bulk-configured VC subrange; when you use the override
keyword, information about base profile assignments is not displayed
filter—SeeFiltering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
553