Path Ds3 - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

path ds3

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
path pathChannel ds3 ds3Channel { [ channelized ] | unchannelized }
no path pathChannel ds3 ds3Channel
Command introduced before JunosE Release 7.1.0.
Creates and configures a DS3 signal. This command applies to a DS3 over channelized
SONET interface. If you do not specify whether or not the path should be channelized,
the router creates a channelized path by default. The no version deletes a path.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the path
Controller Configuration
Chapter 4: P Commands
151