ppp max-bad-auth
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ppp max-bad-auth maxBadAuth
no ppp max-bad-auth
Command introduced before JunosE Release 7.1.0.
Specifies the maximum number of authentication retries the router accepts before
terminating a PPP session. The no version returns the value to the default.
maxBadAuth—Number of authentication retries after which the interface resets itself;
in the range 0–7; default value is 0, which indicates that no retries are allowed
Interface Configuration, Subinterface Configuration
Chapter 4: P Commands
227