Radius Connect-Info-Format - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

radius connect-info-format

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
radius connect-info-format { l2tp-connect-speed |
l2tp-connect-speed-rx-when-equal }
no radius connect-info-format
Command introduced before JunosE Release 7.1.0.
Specifies the format of RADIUS attribute 77, Connect-Info, on the LNS. The format uses
the received L2TP connect-speed AVPs that the LAC sends to the LNS. The no version
restores the default, in which the LNS does not generate the Connect-Info attribute.
l2tp-connect-speed—Specifies that the Connect-Info attribute include only the RX
speed when the RX speed is different from the TX speed and is greater than zero.
l2tp-connect-speed-rx-when-equal—Specifies that the Connect-Info attribute always
include the RX speed when the speed is greater than zero.
Global Configuration
Chapter 6: R Commands
317