JunosE 11.3.x Command Reference Guide N to Z
set dhcp relay layer2-unicast-replies
Syntax
Release Information
Description
Mode
484
[ no ] set dhcp relay layer2-unicast-replies
Command introduced in JunosE Release 7.2.0.
Configures DHCP relay and DHCP relay proxy to use the optional layer 2 unicast and layer
3 broadcast transmission method to transmit DHCP Offer reply packets and ACK reply
packets to DHCP clients during the discovery process. The no version restores the default
method that broadcasts DHCP Offer reply packets and ACK reply packets to all DHCP
clients during the discovery process.
NOTE: The set dhcp relay layer2-unicast-replies command and the set dhcp
relay broadcast-flag-replies command are mutually exclusive. If you attempt
to issue the set dhcp relay layer2-unicast-replies command when the set
dhcp relay broadcast-flag-replies command is already in effect, the operation
fails and the router displays an error.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 and is the answer not in the manual?