JunosE 11.3.x Command Reference Guide N to Z
overload advertise-high-metric issu
Syntax
Release Information
Description
Mode
120
[ no ] overload advertise-high-metric issu
Command introduced in JunosE Release 9.0.0.
Configures IS-IS or OSPF to advertise the maximum link cost on each interface to its
neighbors when a unified in-service software upgrade is started, causing neighbors to
route around the upgrading router. The no version restores the default behavior, which
is to advertise configured link costs.
Router Configuration
Copyright © 2010, Juniper Networks, Inc.