JunosE 11.3.x Command Reference Guide N to Z
path ds3 t1 fdl carrier
Syntax
Release Information
Description
Options
Mode
168
[ no ] path pathChannel ds3 ds3Channel t1 t1Channel fdl carrier
Command introduced before JunosE Release 7.1.0.
Specifies that a T1 channel on a DS3 signal is used in the carrier environment. This
command applies to a T1 channel on a DS3 over channelized SONET interface. The no
version restores the default situation, in which an interface does not operate in the carrier
environment.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.