Retransmit - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

retransmit

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
retransmit retries
no retransmit
Command introduced before JunosE Release 7.1.0.
Specifies the maximum number of times a router retransmits a RADIUS packet to an
authentication or accounting server. The no version restores the default value.
retries—Number of retries, in the range 0–100; default value is 3
RADIUS Configuration
Chapter 6: R Commands
395