path ds3 t1 snmp trap link-status
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] path pathChannel ds3 ds3Channel t1 t1Channel [ /subchannel ]
snmp trap link-status
Command introduced before JunosE Release 7.1.0.
Enables SNMP link status processing for a T1 channel group or subchannel on a DS3
signal. This command applies to a T1 channel or subchannel on a DS3 over channelized
SONET interface. The no version disables SNMP link status processing for a T1 channel.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
subchannel—Fractional T1 interface, in the range 1–24
Controller Configuration
Chapter 4: P Commands
175