Pre-Share - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

pre-share

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
pre-share key
no pre-share
Command introduced before JunosE Release 7.1.0.
Configures an unencrypted (red) preshared key. The router uses this key to authenticate
IKE negotiations that arrive from any remote IP address specified for this transport profile
and that are destined for the local IP address specified. The no version removes the key.
NOTE: To have preshared key authentication take place, you must also
specify the IKE policy rule as preshared by issuing the authentication
command with the pre-share keyword in ISAKMP Policy Configuration mode.
key—Key value in ASCII format
Local IPSec Transport Profile Configuration
Chapter 4: P Commands
263