Ppp Hash-Link-Selection - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

ppp hash-link-selection

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ppp hash-link-selection
Command introduced in JunosE Release 7.2.0.
Enables use of a hash-based algorithm to select the link on which the router transmits
high-priority (non-best-effort) packets, such as voice or video, on an MLPPP interface.
If hash-based link selection is enabled, the router uses the IP source address and IP
destination address of the packet as a hash to select the MLPPP member link on which
to transmit the packet. Using the hash-based algorithm instead of the default round-robin
algorithm for MLPPP link selection ensures that the router maintains the proper packet
order when transmitting high-priority packets. The no version restores the default
round-robin algorithm for MLPPP link selection.
Interface Configuration, Profile Configuration, Subinterface Configuration
Chapter 4: P Commands
217