Service Show-Config - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

service show-config

Syntax
Release Information
Description
Options
Mode
466
service show-config format { 1 | 2 }
no service show-config format
Command introduced before JunosE Release 7.1.0.
Formats show configuration command output. The no version reverts the show
configuration command format to its default (format 1).
1—Format of the original show configuration command output
2—Format enhancement to the show configuration command that can significantly
reduce the amount of time it takes to generate and display output for configurations
that contain three or more virtual routers and a large number of interfaces
Global Configuration
Copyright © 2010, Juniper Networks, Inc.